Rycolab Crush Tester
Measuring range up to 5000kPa
For determining the compression strength of board and corrugated board.
The Rycolab Crush Tester is suitable for a variety of tests on board & corrugated board. It has a measuring range up to 5000kPa with an accuracy of ±1% of the displayed value. Tests are simple to select from the touch screen and the test cycle is automatic, with break detection prompting the return to the start position. Built on a sturdy frame.
ISO 3035, ISO 3037, TAPPI, T808, T809, T811, T818, T821, T825, T839, FEFCO Nº 6-8 & 11, AFNOR 23035
The sample to be tested is placed on the crush platens. Initiating the start button on the touch screen (or the separate start-button) the lower plate is moved with the selected speed (normally 12.5 mm/min) up to the higher platen. The sample between the platens is crushed, the necessary force for the test is registered and the curve is displayed on screen. After break detection the plate returns to the start position.
|Measuring range from 0 to 5.000 kPa||Compression Plates: 150 x 150 mm|
|Test & approach speeds: 1 – 150 mm/min||Maximum travel : 140 mm|
|Accuracy: <1% of the applied force in a range between 2 -100% of the full scale||Security: electronic (programming) & physical (limit switches) overload protection|
|Force readings with a resolution of 0.004 % of the full scale||Extension readings with a resolution of 0.01 mm|
|RCT, CMT, ECT, CCT, FCT & PAT tests possible||Sample holders for tests not included|
|USB cable connection for maintenance & printer connection||RS-232 interface for connection to management and control programs|
|Driven by servo motor and high accuracy ball screw||Emergency push button|
|Adjustable feet for the equipment leveling||CE mark|
Dimensions: (Net) 360 x 500 x 650 mm (W x D x H): (Gross) 600 x 700 x 850 mm
Electricity: 110-230V, 50-60Hz AC
For further information, please contact our sales team on 01223 492081 or via email@example.com