EJA Vantage Universal Material Tensile Tester
The highest capacity tester in the Vantage NX and EJA Vantage Series. Capable of testing above and below the moving crosshead. Can be configured with two load cells and a variety of test fixtures.
The EJA Vantage 10 tensile tester is the highest capacity tester in the Vantage NX and EJA Vantage Series.
Capable of testing above and below the moving crosshead, the EJA Vantage 10 offers maximum testing flexibility. It can be configured with two load cells and a variety of test fixtures. This enables the operator to switch from one test to another with minimal downtime.
Used to to perform a wide range of tests including tensile, flexural, compression, peel, tear, burst, friction, ZDT, cycling and modulus stress relaxation and insertion/extraction.
- Ideal for Quality Control, Engineering, Research and Development
- Capacity: 10kN, 2000 lbs and 24″ (610 mm) and 42″ (1067 mm)
- Extensive selection of grips and fixtures including manual and air-operated grips, compression plates and environmental chambers.
- Automatic electronic calibration and one-touch auto zero
- One serial interface to a PC plus serial load cell interface
- Movable test control panel
|Force Capacity 10 kN (2000 lbs)||Load cells : From 20 N to 10kN|
|Load Capacity: ±0.25%||Force Accuracy 10% to 100%|
|Measuring Value Less then 10%||Load Capacity: ±0.025% of Load Cell Capacity|
|Force Resolution 16 Bit A/D to 0,001 N||Position Accuracy ±2.5 μm/25 mm (±0.0001 inch/1.0 inch) or 0.01% of Distance|
|Horizontal Clearance 412.75 mm (16.25 in)|
MAP-4 Software – a more powerful option, with custom test configuration capabilities for defining complex motion control and enabling unlimited test methods. Automatically generates a real-time curve, performs statistical analysis and exports results to a database and user-defined configurations to meet exact requirements
For further information, please contact our sales team on 01223 492081 or via firstname.lastname@example.org
Thwing Albert – Rycobel
Rycobel is the European support centre for several respected instrument manufacturers. We have represented Rycobel in the UK and Ireland since 1997.
Service & Repair We provide access Rycobel's technical services through regular on-site service tours and a 'return to base' option for repair, service and calibration.
For more information contact us via 01223 492081 or email@example.com